Alligator Double Seal Valve Cap V2B – 5 Pack

Description

The ALLIGATOR Double Seal Valve Cap V2B is screwed on instead of the original valve cap and doesn’t need to be removed to check air pressure or to add air.

Pressure checking and inflation happens directly through the valve cap.

The ALLIGATOR Double Seal Valve Cap V2B has been in existence for over 20 years, it has often been copied, but the copies are no match for the original.

Many international fleets prescribe ALLIGATOR V2B valves for all their vehicles.

In the USA alone, approx. 10 million valves are fitted annually with the ALLIGATOR V2B – and so provide for reduced standstill periods and maintenance times, lower operational costs and increased safety.

Technical Advantages:

Fits all standard valves
Service is as long as that of the valve itself – no replacement necessary
Double Seal Valve Cap has two built-in, heat-resistant grommets – preventing air pressure loss even when the valve core is damaged or dirty
Clip-on air chucks hold more reliably due to the grooved surface
The completely sealed end face is dirt and water-repellent

Installation is simple:

Remove old valve caps
Inspect the valve for damage and, if necessary, clean or replace it
Screw on the ALLIGATOR V2B

No additional dust cap required.

Total Length of Valve: 22mm
Skirt Length (Over Valve): 6mm

Pack of 5